69 / 352
65
7.
Aleksandrović, S., (1993):
Formability of thin sheets for non-monotonous plastic deformation
processes
, MSc-thesis, Fac.Mech.Engng., Kragujevac.
8.
Azrin, M. and Backofen, A. (1970):
The deformation and failure of a biaxially stretched
sheet
,Metal. Transactions, 1, pp.2857-2865.
9.
Devedzić, B. and Stefanović, M., (1987):
Effects of the friction and deformation path onstretch-
formability of sheet metal
, 2nd Int.Conf.Technology of Plasticity, Stuttgart, pp.437-444.
10.Ghosh, A.K., and Backofen, A. (1973):
Strain hardening and instability in biaxially stretched
sheets
, Metal. Transactions, 4, pp.1113-1123.
11.Manjoine, M. J. (1982):
Creep-rupture behaviour of weldments
, Welding Research
Supplement, February, pp. 50-57.
12.Mason, J.J., Rosakis, A.J. and Ravichandran, G. (1992):
On the strain and strain-rate
dependence of the fraction of plastic work converted to heat: an experimental study using high
speed infrared detectors and the Kolski bar
, SM Report 92-33.
13.Schwer, L.E., Holmes, B.S. and Kirkpatrick, S.W. (1988):
Response and failure of metal tanks
from impulsive spot loading: experiments and calculations
, Int. J. Solids Structures, Vol.24,No.
8.,pp. 817-833.
14.Tadros, A. K. and Mellor, P. B. A. (1978): An experimental study of the in-plane stretching of
sheet metal, Int. J. Mech. Sci., Vol. 20., pp. 121-134.
15.Vavakin, A.S., Viktorov, V.V., Mohel, A.N . and Stepanov, L.P. (1986):
On creep influence on
plastic deformation of steel during complex loading
, (in Russian), in: Physics of Strength and
Plasticity, ed. S. N. Zhurkov, Nauka, St. Petrsburg, pp. 142-148.
16.Zhukov, A.M., and Rabotnov, Yu. N. (1954):
Research on plastic deformation of steel during
complex loading
, (in Russian), MTT, vol. 18., pp. 105-112.
Analytical papers dealing with ductile fracture
17.Berg, C. A. (1962):
The motion of Cracks in Plane Viscous Deformation
, ASME Proceedings
of the Fourth U.S. National Congress of Applied Mechanics, Vol. 2., pp. 885-892.
18.Gurson, A.L., (1977):
Continuum Theory of Ductile Rupture by Void Nucleation and
Growth:Part I - Yield Criteria and Flow Rules for Porous Ductile Media
, J.Engng.Materials
Technol.Vol.99, p.2-15.
19.Hill, R., (1957):
On the Problem of Uniqueness in the Theory of a Rigid Plastic Material -
III
,J.Mech.Phys.Solids Vol. 5, p. 153-161.
20.Hillier, M. J. (1963):
Tensile Plastic Instability under Complex Stress
, Int. J. Mech. Sci.,Vol.5,
pp.57-67.
21.Korhonen, A. S. (1968):
On the Theories of Sheet Metal Necking and Forming Limits
, ASMEJ.
Engng. Mat. Technology, Vol. 100., pp. 303-309.
22.Marciniak, Z. and Kuczyńsky, K., (1967):
Limit strains in the processes of stretch-forming
sheet metal
, Int. J. Mech. Sci., Vol. 9, No. 9, p. 609-620.
23. McClintock, F. A. (1968):
A Criterion for Ductile Fracture by the Growth of Holes
, ASME
J.Appl. Mech., Vol. 35., pp. 363-371.
24.Tverdaard, V. (1982):
On localization in Ductile Materials containing Spherical Voids
, Int. J.
Fracture, Vol.18, pp. 237-252.
General references related to the subject
25.Albertini, C., Montagnani, M and M. Mićunović (1989):
Viscoplastic Behaviour of AISI 316 H-
Multiaxial Experimental Results in
: Hadjian( ed.), Transactions of SMIRT-10, Los Angeles
26.Albertini, C., Montagnani, M and M. Mićunović: (1991):
Viscoplastic behaviour of AISI 316H:
multiaxial experimental results and preliminary numerical analysis
, Nuclear Engineeringand
Design, 130, pp. 205-210.
27.Armstrong, R and Zerilli, F. (1988):
Dislocation mechanics based analysis of material
dynamics behaviour
, J. de Physique, 49, pp. C3-59.
28.Hill, R. (1950): The Mathematical Theory of Plasticity, Oxford :Clarendon.