2 / 352
This monograph is published with the financial support of the
Ministry of Science and Technological Development of the Republic of Serbia
Jointly published by the
Faculty of Mechanical Engineering (MF), University of Belgrade
Faculty of Technology and Metallurgy (TMF), University of Belgrade
Society for Structural Integrity and Life (DIVK)
Institute for Materials Testing IMS, Belgrade
© 2009 MF, TMF, DIVK and IMS
All rights reserved.
This work is protected under copyright by MF, TMF, DIVK and IMS.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronically, mechanically, photocopying, recording or otherwise, without the prior
written permission of the publishers MF, TMF, DIVK and IMS.
Edited, reviewed and corrected by:
Prof. Dr. Stojan Sedmak
Reviewed by:
Prof. Dr. Vitomir Djordjević
Prof. Dr. Endre Romhanji
Graphics and text arrangement:
Boris Hriberšek
First edition 2009
Circulation: 400 copies
Printed by Printing Office of the Faculty of Technology and Metallurgy, University of Belgrade.
To contact the Publisher
Prof. Dr. Stojan Sedmak
Society for Structural Integrity and Life
Bulevar vojvode Mišića 43, room 258
11000 Belgrade, Serbia
Tel. XX-381-11-2631845
E-mail:
Sedmak@divk.org.rs http://divk.org.rsCIP – Каталогизација у публикацији
Народна библиотека Србије, Београд
620.172.24:62-112.81(082)
539.42(082)
INTERNATIONAL Fracture Mechanics Summer School (10 ; 2008 ; Zlatibor)
Fundamentals of Fracture Mechanics and Structural Integrity Assessment Methods : this monograph contains the
lectures presented at the Tenth International Fracture Mechanics Summer School – IFMASS 10, held on mountain
Zlatibor, Serbia, 23th to 27th June 2008. / editor S. [Stojan] Sedmak ; [organizers] Faculty of Mechanical Engineering
…[et al.]. – 1st ed. -Belgrade : Faculty of Mechanical Engineering: Faculty of Technology and Metallurgy : Society for
Structural Integrity and Life :Institute for Materials Testing, 2009 (Belgrade : Faculty of Technology and Metallurgy,
Research and Development Centre of Printing Technlogy). – [6], 346 str. :ilustr. ; 24 cm
Tiraž 400. – Str. [3-4]: Preface / Stojan Sedmak. – Bibliografija uz svaki rad.
ISBN 978-86-82081-19-7 (IMS)
1. Mašinski fakultet (Beograd), 2. Tehnološko-metalurški fakultet (Beograd), 3. Društvo za integritet i vek konstrukcija
(Beograd) 4. Institut za ispitivanje materijala Srbija (Beograd) а) Металне конструкције - Интегритет – Зборници b)
Механика лома – Зборници
COBISS.SR-ID 170781708