VIDEO-PRESENTATIONS Presentation title Authors DOI Notch effect on the VHCF response of Ti6Al4V specimens produced through the SLM process A. Tridello, F. Berto, D.S. Paolino https://doi.org/10.53254/ESISTUBE.ESIAM21.1 Analysis of the behavior of lattice structures under low‐ velocity impacts: simulations and ... M. Della Ripa, D.S. Paolino, A. Amorese, A. Tridello https://doi.org/10.53254/ESISTUBE.ESIAM21.2 A modelling framework for fatigue‐life prediction of selective laser melting additive ... H.O. Psihoyos, Ph.D. Candidate, G.N. Lampeas, Prof. S.G Pantelakis, Prof. Emeritus https://doi.org/10.53254/ESISTUBE.ESIAM21.3 Fatigue behaviour assessment of additive manufactured Ti‐ 6Al‐4V by means of a critical... C. Ronchei, S. Vantadori, D. Scorza, A. Zanichelli, A. Carpinteri https://doi.org/10.53254/ESISTUBE.ESIAM21.4 Morphology and weld Strength of a Semi‐Crystalline Polymer Produced via Material Extrusion‐Based ... S. Petersmann https://doi.org/10.53254/ESISTUBE.ESIAM21.5 Bio‐Inspired Toughening of Composites in 3D‐Printing J. Stögener https://doi.org/10.53254/ESISTUBE.ESIAM21.6 Ink development for the fabrication of digital materials with increased fracture toughness B. Koch, A. Hochwallner, R. Liska, J. Stampfl https://doi.org/10.53254/ESISTUBE.ESIAM21.7 Influence of finishing in Ti6Al4V AM specimens under VHCF conditions L. Reis, P.R. da Costa, M. Sardinha, M. Freitas https://doi.org/10.53254/ESISTUBE.ESIAM21.8 Fatigue damage assessment in AM polymers evaluating their energy release D. Santonocito, P. Foti, G. Risitano, F. Berto https://doi.org/10.53254/ESISTUBE.ESIAM21.9 The use of Additive Manufactured Inconel 625 as Bipolar Plate for the High Temperature ... J. SVendby. O. Bjelland, D. Bokach, B. G. B. Solheim https://doi.org/10.53254/ESISTUBE.ESIAM21.10 Surface quality and fatigue behavior of L‐PBF AlSi10Mg in as‐built condition. R. Konecna, F. Uriati, G. Nicoletto, T. Varmus https://doi.org/10.53254/ESISTUBE.ESIAM21.11 The relaxation of macroscopic residual stresses in laser powder bed fused stainless steel 316L M. Sprengel, A. Ulbricht, A. Evans, A. Krom, K. Sommer, J. Kelleher, G. Bruno, T. Kannengieber https://doi.org/10.53254/ESISTUBE.ESIAM21.12
RkJQdWJsaXNoZXIy MjM0NDE=