Presentation title Authors DOI Micromechanical Parameter Identification using Integrated DIC with Accurate Kinematic Boundary Condi Johan Hoefnagels, Ondrej Rokos, Ron Peerlings, Marc Geers https://doi.org/10.53254/ESISTUBE.ECF22_H.41 Mechanical modelling of self diagnostic polymers R. Brighenti, F. Artoni https://doi.org/10.53254/ESISTUBE.ECF22_H.42 Main factors infecting creep strain at tip of stress corrosion cracking in full life cycle Y. Cui, H. Xue, S. Wang, X. Gong https://doi.org/10.53254/ESISTUBE.ECF22_H.43 Influence of glued in reinforcement profiles on the thermal characteristics of wooden window profile B. Śubic, A. Ugovšek, N. Starman, R. Tatic, A. Kovačič, G. Fajdiga https://doi.org/10.53254/ESISTUBE.ECF22_H.44 Implications of substrate geometry and coating thickness on the cracking resistance of polymer based L.‐A. Wray, D. Ayre, P. Irving, P. Jackson, P. Jones, F. Zhao https://doi.org/10.53254/ESISTUBE.ECF22_H.45 High speed observation of fast crack propagation and arrest behaviors in 3D transparent structures F. Yanagimoto, K. Shibanuma, K. Suzuki https://doi.org/10.53254/ESISTUBE.ECF22_H.46 High Rate Response and Dynamic Failure of Aluminosilicate Glass under Compression Loading M.S. Zakir, Z. Wang, T. Suo, Y. Li, F. Zhou, A. Sohail https://doi.org/10.53254/ESISTUBE.ECF22_H.47 A microstructure sensitive modeling approach for fatigue life prediction considering the residual st C. Gu, J. Lian, Y. Bao, S. Münstermann https://doi.org/10.53254/ESISTUBE.ECF22_I.1 Defects and fatigue failure U. Zerbst, M. Madia https://doi.org/10.53254/ESISTUBE.ECF22_I.2 Effect of surface finish on the fatigue strength of pushbelt components D. Tran, B. Pennings, S. Kamath, M. Diaz https://doi.org/10.53254/ESISTUBE.ECF22_I.3 Fatigue life analysis of edge notch with damages S. Boljanović, S. Maksimović, A. Carpinteri https://doi.org/10.53254/ESISTUBE.ECF22_I.4 Influence of plate like alumina on the high cycle fatigue behaviour of 42CrMo4 steel M. Seleznev, J. Gleinig, K.Y. Wong, A. Weidner, H. Biermann https://doi.org/10.53254/ESISTUBE.ECF22_I.5 Modelling Approach for Predicting Crack Initiation at Forging Defects A. Aydin, I. Varfolomeev, C. Amann https://doi.org/10.53254/ESISTUBE.ECF22_I.6 On the effect of weld defects on the fatigue strength of beam welded butt joints A. Hesse, Th. Nitschke‐Pagel, J. Hensel, K. Dilger https://doi.org/10.53254/ESISTUBE.ECF22_I.7
RkJQdWJsaXNoZXIy MjM0NDE=