Strength and Ductility Loss of Magnesium-Gadolinium due to Corrosion in Physiological Environment D. Steglich1,∗, J. Besson2, I. Reinke1, H. Helmholz3,M. Luczak3, V. Garamus3, B.Wiese3, D. Höche4, C. Cyron1,5, R. Willumeit-Römer3 1 Institute of Material Systems Modeling, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany 2 Centre des Matériaux, PSL Research University, Mines ParisTech, 91003 Evry Cedex, France 3 Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany 4 Institute of Surface Science, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany 5 Institute for Continuum and Material Mechanics, Hamburg University of Technology, 21073 Hamburg, Germany ∗ dirk.steglich@hereon.de Keywords: Biodegradable magnesium, Corrosion localisation, Damage modeling. Magnesium (Mg) and its alloys are becoming increasingly popular as alternatives to permanent implant materials due to their biodegradability, biocompatibility and ability to promote bone growth. We propose a computational framework to study the effect of corrosion on the mechanical strength of magnesium samples. Our work is motivated by the need to predict the residual strength of biomedical Mg implants after a given period of degradation in a physiological environment. To model corrosion, a mass-diffusion type model is used that accounts for localised corrosion using Weibull statistics. The overall mass loss is prescribed (e.g., based on experimental data). The mechanical behavior of the Mg samples is modeled by a state-of-theart Cazacu-Plunkett-Barlat plasticity model [1] with a coupled damage model. This allowed us to study how Mg degradation in immersed samples reduces the mechanical strength over time. We performed a large number of in vitro corrosion experiments and subsequent mechanical tests to validate our computational framework. Our framework could predict both for tension and compression tests the experimentally observed loss of mechanical strength and ductility due to corrosion [2]. Our study confirmed that it is important to consider the surface/volume effect of the samples during corrosion testing and numerical analysis. References [1] O. Cazacu, B. Plunkett, F. Barlat, Orthotropic yield criterion for hexagonal closed packed metals, Int. J. Plast. 22 (2006) 1171–1194. [2] Steglich et al., Strength and Ductility Loss of Magnesium-Gadolinium due to Corrosion in Physiological Environment: Experiments and Modeling. Accepted for publication in Journal of the Mechanical Behavior of Biomedical Materials 38
RkJQdWJsaXNoZXIy MjM0NDE=